| Anmol Chemicals is the pioneer manufacturers of Ammonium ChloridPharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Ammonium Chloride made in an ISO9001, ISO22000 (FSSC22000) and cGMP GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Ammonium Chloride is in these pages. |
| The unit has the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal |
Ammonium Chloride BP Ph Eur USP Reagent FCC Food Grade Manufacturers
----------
CAS Number 7646-85-7
Ammonium Chloride
Ammonium Chloride Blocks Bars or Bricks of 500gm each & 100gm Tablet Pellets.
This is a short computer translation of our WebPages. For Clarification and Safety Data Sheet of Ammonium Chloride Manufacturers, please visit our Home Page
Ammonium Chloride is made in our Automatic Vacuum Evaporated Plant. Grades offered are as under:
Specifications of Ammonium Chloride Pure Grade| CHARACTERISTIC | Pharmaceutical & Battery Grade, Anti caking and Uncoated Extra Pure |
| Dry Basis Assay (NH4Cl) | 99.5% min. |
| Moisture | 0.5% max. |
| Iron | 5 ppm max |
| Sulphate | 0.015% max. |
| Residue on Ignition | 0.3% max |
| pH of 2% Solution | 4.0-5.5 |
| Matter insoluble in water | 0.005% max. |
| Heavy Metals as Pb | 1 ppm max. |
| Arsenic | 1 ppm max. |
We offer Ammonium Chloride IP Ammonium Chloride BP Ammonium Chloride USP and Ammonium Chloride Ph Eur from our world class FDA approved, ISO-9001-2008 Certified and ISO 22000 HACCP Certified facility, Anmol Chemicals
Specifications of Ammonium Chloride USP Grade
NH4Cl 53.49
Assay: Ammonium Chloride contains not less than 99.5 percent and not more than 100.5 percent of NH4Cl, calculated on the dried basis.
Identification: A solution (1 in 10) responds to the tests for Ammonium and for Chloride
pH: between 4.6 and 6.0, in a solution (1 in 20).
Loss on drying: Dry it over silica gel for 4 hours: it loses not more than 0.5% of its weight.
Residue on ignition: Add 1 mL of sulfuric acid to about 2 g, accurately weighed, and heat the mixture gently until volatilization is complete: the residue is
white, and when ignited, not more than 0.1% of nonvolatile substance remains.
Limit of thiocyanate: Acidify 10 mL of a solution (1 in 10) with hydrochloric acid, and add a few drops of ferric chloride TS: no orange-red color is produced.
Heavy metals: 0.001%.
Specifications of Ammonium Chloride BP Ph Eur Grade
NH4Cl
DEFINITION
Content or Assay:
99.0 per cent to 100.5 per cent (On dried substance basis).
CHARACTERS
Appearance:
White or almost white, crystalline powder or colourless crystals.
Solubility:
Freely soluble in water.
IDENTIFICATION
A. It gives the reactions of chlorides.
B. 10 ml of solution gives the reaction of ammonium salts.
TESTS
Solution S:
A 10% solution:
Appearance of solution: Solution is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.05 ml of methyl red solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is
required to change the colour of the indicator.
Bromides and iodides: To 10 ml of solution S add 0.1 ml of dilute hydrochloric acid R and 0.05 ml of chloramine solution. After 1 min, add 2 ml of chloroform R
and shake vigorously. The chloroform layer remains colourless.
Sulphates: Maximum 150 ppm.
Calcium: Maximum 200 ppm.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.00 g by drying in an oven at 105°C for 2 h.
Sulphated ash: Maximum 0.1 per cent, determined on 2.0 g.
Ammonium Chloride FCC Food Grade
NH4Cl Formula weight 53.49
DESCRIPTION
Ammonium Chloride occurs as colorless crystals or as a white, fine or coarse, crystalline powder. It is somewhat hygroscopic. One gram dissolves in 2.6 mL of water
at 25°, in 1.4 mL of boiling water, in about 100 mL of alcohol, and in about 8 mL of glycerin. The pH of a 1:20 solution is between 4.5 and 6.0.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Ammonium and for Chloride.
Assay: Not less than 99.0% of NH4Cl after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying: Not more than 0.5%.
Ammonium Chloride Analytical Reagent Grade
NH4Cl Formula Weight 53.49
CAS Number 12125–02–9
REQUIREMENTS
Assay: ≥99.5% NH4Cl
pH of a 5% solution: 4.5–5.5 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Residue after ignition: 0.01%
Calcium (Ca): 0.001%
Magnesium (Mg): 5 ppm
Heavy metals (as Pb): 5 ppm
Iron (Fe): 2 ppm
Phosphate (PO4): 2 ppm
Sulfate (SO4): 0.002%
Exporters to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.
Ammonium Chloride BP Ph Eur USP FCC Food Grade AR LR ACS Analytical Reagent Grade Manufacturers:
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22- 23774610, 23723564. FAX: 91-22-23728264
e-mail: anmolc@mtnl.net.in
Copyright and Usual Disclaimer is Applicable. 01-Mar-2022