Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Magnesium Chloride Hexahydrate Crystals & Anhydrous Powder USP BP Ph Eur FCC Food reagent Grade. It has (FDA) cGMP and GLP approval, ISO-9001 Certificate, "REACH" Pre-registration, ISO-22000 HACCP, Kosher Certificate and Halal Certificate.
----------
Magnesium Chloride Hexahydrate Crystals & Anhydrous Powder USP BP Ph Eur FCC Food reagent Grade Manufacturers
Magnesium Chloride Anhydrous CAS Number 7786-30-3, EINECS 232-094-6, HS Code 282731**, Molecular Weight 95.21, Chemical Formula MgCl2
Magnesium Chloride Hexahydrate CAS Number 7791-18-6, EINECS 232-094-6, HS Code 282731**, Molecular Weight 203.31, Chemical Formula MgCl2-6H2O
Chemically Pure Magnesium Chloride Anhydrous of Dry Basis Assay >99.9%, free from any impurities is used by pharmaceutical industry. We manufacture the same.
Magnesium Chloride Anhydrous Powder Flakes Chips Granules BlocksAssay as MgCl2: 99%
Identification: Positive for Chloride & Magnesium
Solubility: Freely soluble in water
Description: A white deliquescent powder, free from visible impurities.
pH of 10% w/v solution: around 6
Sodium as Na: 20 ppm
Lead as Pb: 3 ppm maximum.
Moisture: 1.5% maximum.
Heavy metals: 10 ppm maximum.
Matter insoluble in water: 800 ppm maximum.
Sulfate as SO4: 100 ppm maximum.
Arsenic: 1 ppm maximum.
Iron as Fe: 10 ppm maximum.
Magnesium Chloride USP
MgCl2-6H2O --- 203.30
Magnesium Chloride Hexahydrate USP CAS 7791-18-6
Magnesium Chloride Anhydrous USP CAS 7786-30-3
Magnesium Chloride contains not less than 98.0 percent and not more than 101.0 percent of MgCl2·6H2O.
Identification: A solution (1 in 20) responds to the tests for Magnesium and for Chloride
pH: between 4.5 and 7.0, in a 1 in 20 solution in carbon dioxide-free water.
Insoluble matter: not more than 0.005% is found.
Sulfate: A 10-g portion shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Barium: Dissolve 1 g in 10 mL of water, and add 1 mL of 2 N sulfuric acid: no turbidity is produced within 2 hours.
Limit of calcium: the limit is 0.01%.
Potassium: Dissolve 5 g in 5 mL of water, and add 0.2 mL of sodium bitartrate TS: no turbidity is produced within 5 minutes.
Aluminum (where it is labeled as intended for use in hem dialysis): the limit is 1 µg per g.
Heavy metals: the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Magnesium Chloride BP
MgCl2.6H2O
Magnesium Chloride Hexahydrate BP CAS 7791-18-6
Magnesium Chloride Anhydrous BP CAS 7786-30-3
DEFINITION
Content: 98.0 per cent to 101.0 per cent of MgCl2,6H2O.
CHARACTERS
Appearance: Colourless crystals, hygroscopic.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).
IDENTIFICATION
Water % (see Tests).
It gives reaction of chlorides.
It gives the reaction of magnesium.
TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 5 ml of solution S add 0.05 ml of phenol red solution R. Not more than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides: Maximum 500 ppm.
Sulphates: Maximum 100 ppm, determined on solution S.
Aluminium: Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic: Maximum 2 ppm, determined on 0.5 g.
Calcium: Maximum 0.1 per cent.
Iron: Maximum 10 ppm, determined on solution S.
Potassium: Maximum 5.0 × 102 ppm, if intended for use in the manufacture of parenteral dosage forms.
Atomic emission spectrometry: Passes the test
Heavy metals: Maximum 10 ppm.
Water: 51.0 per cent to 55.0 per cent, determined on 50.0 mg.
Magnesium Chloride FCC Food Grade
MgCl2-6H2O Formula weight 203.30
DESCRIPTION
Magnesium Chloride occurs as colorless flakes or crystals. It contains six molecules of water of hydration. It is hygroscopic, very soluble in water, and freely soluble in alcohol.
Function: Color-retention agent; firming agent.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Magnesium and for Chloride.
Assay: Not less than 99.0% and not more than 105.0% of MgCl2·6H2O.
Ammonium: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Sulfate: Not more than 0.03%.
Magnesium chloride (E511 is an important coagulant used in the preparation of cheese and tofu. It is also used as an ingredient in baby formula milk.
Magnesium Chloride Hexahydrate Analytical Reagent Specifications
MgCl2 . 6H2O
Formula Wt 203.30
CAS Number 7791-18-6
REQUIREMENTS
Assay: 99.0-102.0% MgCl2 . 6H2O
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Nitrate (NO3): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Ammonium (NH4): 0.002%
Barium (Ba): 0.005%
Calcium (Ca): 0.01%
Manganese (Mn): 5 ppm
Potassium (K): 0.005%
Sodium (Na): 0.005%
Strontium (Sr): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
For an exhaustive Write-up on the product Manufacture, Specifications, Uses, Applications, MSDS etc. you may write to us.
Contact
Magnesium Chloride Hexahydrate Anhydrous USP BP Ph Eur FCC Food reagent Grade Manufacturers at:
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22- 23774610, 23723564. FAX: 91-22-23728264 Check
e-mail: anmolc@mtnl.net.in
We also supply Aluminum Chloride Anhydrous Hexahydrate, Ammonium Persulfate, Ammonium Carbonate, Ammonium Bicarbonate, Calcium Chloride, Chromium Chloride Hexahydrate, Copper Chloride, Magnesium Chloride Hexahydrate Anhydrous, Potassium Chloride, Sodium Acetate, Zinc Chloride.
Exporters to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.
Copyright and Usual Disclaimer is Applicable. 01-Mar-2022