Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Aluminium Chloride or Aluminum Chloride Anhydrous Hexahydrate USP BP Ph Eur Grade. It has (FDA) cGMP and GLP approval, ISO-9001 Certificate, "REACH" Pre-registration, ISO-22000 HACCP, Kosher Certificate and Halal Certificate.

Home ---------- Contact

Aluminium Chloride or Aluminum Chloride Anhydrous Hexahydrate USP BP Ph Eur Manufacturers

CAS Number Aluminum chloride hexahydrate 7784-13-6, EINECS EC Number 231-208-1, HS Code 282732**, Molecular Weight 241.43, Molecular Formula AlCl3-6H2O
CAS Number Aluminum chloride anhydrous 7446-70-0, EINECS EC Number 231-208-1, HS Code: 282732**, Molecular Weight 134.34, Molecular Formula: AlCl3

Aluminum chloride hexahydrate manufacturers Aluminum chloride anhydrous manufacturers

Specifications of Aluminum Chloride USP Grade
AlCl3·6H2O -- 241.43 -- CAS 7784-13-6

Aluminum Chloride contains not less than 95.0 percent and not more than 102.0 percent of AlCl3, calculated on the anhydrous basis.

Identification: A solution (1 in 10) responds to the tests for Aluminum and for Chloride.
Water: Between 42.0% and 48.0%.
Sulfate: The addition of 0.2 mL of barium chloride to 10 mL of a solution (1 in 100) produces no turbidity within 1 minute.
Limit of alkalies and alkaline earths: the limit is 0.5%.
Heavy metals: the limit is 0.002%.
Iron: the limit is 0.001%.

Aluminum chloride hexahydrate manufacturers

Specifications of Aluminium Chloride Hexahydrate BP Grade Ph Eur
AlCl3,6H2O -- 241.4 -- CAS 7784-13-6

Content: 95.0 per cent to 101.0 per cent.

Appearance: White or slightly yellow, crystalline powder or colourless crystals, deliquescent.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent), soluble in glycerol.

A. Dilute 0.1 ml of solution S2 (see Tests) to 2 ml with water. The solution gives reaction of chlorides.
B. Dilute 0.3 ml of solution S2 to 2 ml with water. The solution gives the reaction of aluminium.

Solution S1: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Solution S2: Dilute 50 ml of solution S1 to 100 ml with water.
Appearance of solution: Solution S2 is clear and not more intensely coloured than reference solution.
Sulphates: Maximum 100 ppm, determined on solution S1.
Iron: Maximum 10 ppm, determined on solution S1.
Alkali and alkaline-earth metals: Maximum 0.5 per cent.
Heavy metals: Maximum 20 ppm.
Water: 42.0 per cent to 48.0 per cent, determined on 50.0 mg.

Specifications of Anhydrous Aluminum Chloride or Aluminium Chloride Anhydrous Commercial

Characteristic Aluminium Chloride Powder Aluminium Chloride Crystals
Particle Size 0-2 mm 2-10 mm
Color Yellowish-Grey-Greenish Yellowish-Grey-Greenish
Odor Hydrochloric Acid Odor Hydrochloric Acid Odor
Assay, percent by mass, min 98.5% 98.5%
Insoluble matter, percent by mass, max 0.4% 0.4%
pH of 5% solution 3-4.5 3-4.5

Aluminum chloride anhydrous manufacturers

For an exhaustive Write-up on the product Manufacture, Specifications, Uses, Applications, MSDS etc. you may write to us.

Aluminium Chloride or Aluminum Chloride Anhydrous Hexahydrate USP BP Ph Eur Manufacturers at:

Anmol Chemicals
TEL: (OFFICE) 91-22- 23774610, 23723564. FAX: 91-22-23728264 Check


Manufacturers India

We also supply Aluminum Chloride Anhydrous Hexahydrate, Ammonium Persulfate, Ammonium Carbonate, Ammonium Bicarbonate, Calcium Chloride, Chromium Chloride Hexahydrate, Copper Chloride, Magnesium Chloride Hexahydrate Anhydrous, Potassium Chloride, Sodium Acetate, Zinc Chloride.

Exporters to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.

Copyright and Usual Disclaimer is Applicable. 01-Mar-2022